watch straps
Thanks to our smart design with interchangeable straps you genuine can change the look of your watch in no time.
Start by choosing the collection of the watch you own, then pick and choose from our selection of elegant mesh, leather or playful NATO straps. Once you find the strap you want, you can select the color and size to match your watch.
or use the filter to find a matching watch strap to your watch
New Straps for your Petite Watch
Petite Melrose
Rose Gold£45Petite Sterling
Silver£45Petite Ashfield
Black£45Petite Bondi
Rose Gold£35Petite Bristol
Rose Gold£35Petite Dover
Rose Gold£25Petite Durham
Rose Gold£35Petite Reading
Rose Gold£35Petite Sheffield
Rose Gold£35Petite Cornwall
Rose Gold£25Petite St Mawes
Rose Gold£35Petite York
Rose Gold£35Petite Rosewater
Rose Gold£25
New Straps for your Quadro Watch
New Straps for your Classic Watch
Classic Bristol
Rose Gold£35Classic Durham
Rose Gold£35Classic Reading
Rose Gold£35Classic Sheffield
Rose Gold£35Classic St Mawes
Rose Gold£35Classic York
Rose Gold£35Classic Glasgow
Rose Gold£25Classic Oxford
Rose Gold£25Classic Winchester
Rose Gold£25Classic Southampton
Rose Gold£25Classic Cambridge
Rose Gold£25Classic Canterbury
Rose Gold£25Classic Warwick
Rose Gold£25Classic Bayswater
Rose Gold£25Classic Roselyn
Rose Gold£25Classic Cornwall
Rose Gold£25
how to change your strap
Find structions below
1. Find the tool
1. Find the tool
2: LOOSEN THE SPRING BAR
2: LOOSEN THE SPRING BAR
3: REMOVE THE STRAP
3: REMOVE THE STRAP
4: PUSH THE SPRING BAR INSIDE THE LUG
4: PUSH THE SPRING BAR INSIDE THE LUG
5: ATTACH THE NEW STRAP
5: ATTACH THE NEW STRAP
Step 1: Find the tool
Use the strap tool included in the bottom of your watch case for changing both leather and mesh straps. You can also use a similar, small item with a narrow point (like an earring or a needle) to change or adjust the size of your strap.
STEP 2: LOOSEN THE SPRING BAR
Use the narrow end of the tool to push the spring bar through the hole from the side of the lug. When pushed, the spring bar will loosen from the hole and can easily be detached from the other lug.
STEP 3: REMOVE THE STRAP
Detach the strap from the watch and remove the spring bar from inside the strap. The same bar will be used to attach the new strap.
STEP 4: PUSH THE SPRING BAR INSIDE THE LUG
To attach a leather or a mesh strap, push the spring bar through the hole in the watch strap until both ends are visible.
STEP 5: ATTACH THE NEW STRAP
Place one end of the spring bar in the hole in one lug and push the other end into the hole in the second lug to attach the strap.
WATCH OUR HOW-TO VIDEOS ON YOUTUBE:
How to change a Mesh strap to a Leather strap: Watch here How to change a Leather strap to a Nato strap: Watch here How to change a Nato strap to a Leather strap: Watch here
1. Slide the strap out from the loop
1. Slide the strap out from the loop
2: Slide the watch case out of the strap
2: Slide the watch case out of the strap
3: If the spring bars are removed, attach the spring bars
3: If the spring bars are removed, attach the spring bars
4: PREPARE THE NEW STRAP
4: PREPARE THE NEW STRAP
5: POSITION THE WATCH CASE ON THE NEW STRAP
5: POSITION THE WATCH CASE ON THE NEW STRAP
6: SLIDE THE STRAP THROUGH THE LOOp
6: SLIDE THE STRAP THROUGH THE LOOp
Step 1: Slide the strap out from the loop
Pull the longer strap piece out through the metal loop.
STEP 2: Slide the watch case out of the strap
Remove the watch case by sliding the watch case out of the strap.
STEP 3: If the spring bars are removed, attach the spring bars
Place one end of the spring bar in the hole in one lug and push the other end into the hole in the second lug.
STEP 4: PREPARE THE NEW STRAP
Prepare the new strap by separating the two strap parts from each other. Pull the longer strap piece up through the metal loop.
STEP 5: POSITION THE WATCH CASE ON THE NEW STRAP
Start at the top of the watch case and insert the long part of the strap from the front of the watch to the back through the opening between the watch case and the spring bar. Pull the strap and insert it from back to front through the opening at the bottom of the case. Slide the case to the middle of the strap.
STEP 6: SLIDE THE STRAP THROUGH THE LOOp
Insert the long end of the strap through the metallic loop at the end of the shorter part of the strap.
watch our how-to videos on YouTube:
How to change a Nato strap to a Nato strap: Watch here How to change a Leather strap to a Nato strap: Watch here How to change a Nato strap to a Leather strap: Watch here
1. Find the tool
1. Find the tool
2: LOOSEN THE SPRING BAR
2: LOOSEN THE SPRING BAR
3: REMOVE THE STRAP
3: REMOVE THE STRAP