smartwatch case
assembly guide

smartwatch case

assembly guide
HOW TO REMOVE AND ATTACH YOUR SMARTWATCH CASE

1. OPEN THE CASEBACK

To open the caseback, remove the four screws by using the provided screwdriver.

2. TURN OFF YOUR SMARTWATCH

3. PUT YOUR SMARTWATCH INTO THE SILICONE COVER

Insert your smartwatch into the silicone cover. Make sure to align all openings with the button and crown of the watch.

4. PUT THE SMARTWATCH WITH THE SILICONE COVER INTO THE WATCH CASE

Make sure the button and crown are aligned with the watchcase.

5. ALIGN THE BUTTON AND CROWN WITH THE CASEBACK

Make sure the button and crown are aligned with the caseback. The screws on the caseback must be attached crosswise like an X. Start with the upper left, the lower right, the upper right, and the lower left.

6. TURN ON YOUR SMARTWATCH
1. OPEN THE CASEBACK
1. OPEN THE CASEBACK
2. Power Off
2. Power Off
3. Insert into silicon cover
3. Insert into silicon cover
4. insert into the case
4. insert into the case
5. Align and screw back
5. Align and screw back
6. Power on
6. Power on
© 2022 Daniel Wellington INC